成都创新互联网站制作重庆分公司

（8）点云数据处理学习——ICPregistration（迭代最近点）-创新互联

1、主要参考

（1）官方介绍地址

创新互联公司是一家集网站建设,平阴企业网站建设,平阴品牌网站建设,网站定制,平阴网站建设报价,网络营销,网络优化,平阴网站推广为一体的创新建站企业，帮助传统企业提升企业形象加强企业竞争力。可充分满足这一群体相比中小企业更为丰富、高端、多元的互联网需求。同时我们时刻保持专业、时尚、前沿，时刻以成就客户成长自我，坚持不断学习、思考、沉淀、净化自己，让我们为更多的企业打造出实用型网站。

ICP registration — Open3D 0.16.0 documentation

2、介绍 2.1 原理

（1）关于ICP registration

本教程演示ICP(迭代最近点)配准算法。多年来，它一直是研究和工业中几何配准的支柱。输入是两个点云和一个初始转换，该转换大致将源点云与目标点云对齐。输出是一个精细化的转换，它将两个点云紧密对齐。一个助手函数draw_registration_result可视化注册过程中的对齐情况。在本教程中，我们展示了两种ICP变体，点到点ICP和点到面ICP [Rusinkiewicz2001]。

2.2 辅助可视化函数

（2）采用的辅助可视化函数

下面的函数可视化了一个目标点云和一个经过对齐转换的源点云。目标点云和源点云分别绘以青色和黄色。两点云重叠越紧密，对准效果越好。

def draw_registration_result(source, target, transformation):
    source_temp = copy.deepcopy(source)
    target_temp = copy.deepcopy(target)
    source_temp.paint_uniform_color([1, 0.706, 0])
    target_temp.paint_uniform_color([0, 0.651, 0.929])
    source_temp.transform(transformation)
    o3d.visualization.draw_geometries([source_temp, target_temp],
                                      zoom=0.4459,
                                      front=[0.9288, -0.2951, -0.2242],
                                      lookat=[1.6784, 2.0612, 1.4451],
                                      up=[-0.3402, -0.9189, -0.1996])

注意：由于函数transform和paint_uniform_color改变了点云，我们调用copy.deepcopy（深度复制，即重新拷贝一份全新的对象）来复制和保护原始的点云。

2.3 输入

下面的代码从两个文件读取一个源点云和一个目标点云。给出了一个粗略的变换。

注意：初始对准通常采用全局配准算法。有关示例，请参见全局注册 Global registration例子。

2.3 .1 两个原始输入

（1）先看看两个原始点云的分别

import open3d as o3d
import numpy as np
from copy import deepcopy

#（一）先简单看看
demo_icp_pcds = o3d.data.DemoICPPointClouds()
source = o3d.io.read_point_cloud(demo_icp_pcds.paths[0])
target = o3d.io.read_point_cloud(demo_icp_pcds.paths[1])

o3d.visualization.draw_geometries([source,target])

（2）可以看到两个模型一开始没有对准，可以理解成在两个角度采集的

2.3.2两个输入粗略配准

（1）下面是 

import open3d as o3d
import numpy as np
from copy import deepcopy

def draw_registration_result(source, target, transformation):
    # source_temp = copy.deepcopy(source)
    # target_temp = copy.deepcopy(target)
    source_temp = deepcopy(source)
    target_temp = deepcopy(target)
    source_temp.paint_uniform_color([1, 0.706, 0])
    target_temp.paint_uniform_color([0, 0.651, 0.929])
    source_temp.transform(transformation)
    o3d.visualization.draw_geometries([source_temp, target_temp],
                                      zoom=0.4459,
                                      front=[0.9288, -0.2951, -0.2242],
                                      lookat=[1.6784, 2.0612, 1.4451],
                                      up=[-0.3402, -0.9189, -0.1996])


demo_icp_pcds = o3d.data.DemoICPPointClouds()
source = o3d.io.read_point_cloud(demo_icp_pcds.paths[0])
target = o3d.io.read_point_cloud(demo_icp_pcds.paths[1])
threshold = 0.02
trans_init = np.asarray([[0.862, 0.011, -0.507, 0.5],
                         [-0.139, 0.967, -0.215, 0.7],
                         [0.487, 0.255, 0.835, -1.4], [0.0, 0.0, 0.0, 1.0]])
draw_registration_result(source, target, trans_init)

（2）配准后的两种颜色，对应两个输入，看看是真的粗略配准了

2.4 初始化注册函数evaluate_registration

（1）说明

evaluate_registration函数计算两个主要指标:
fitness, 适应度，衡量重叠区域(内部对应的# /目标点的#)。越高越好。
inlier_rmse，它计算所有内部（inlier）匹配的RMSE。越低越好。

（2）代码测试一下

import open3d as o3d
import numpy as np
from copy import deepcopy

# #（一）先简单看看
# demo_icp_pcds = o3d.data.DemoICPPointClouds()
# source = o3d.io.read_point_cloud(demo_icp_pcds.paths[0])
# target = o3d.io.read_point_cloud(demo_icp_pcds.paths[1])

# o3d.visualization.draw_geometries([source,target])


#（二）粗略配准
def draw_registration_result(source, target, transformation):
    # source_temp = copy.deepcopy(source)
    # target_temp = copy.deepcopy(target)
    source_temp = deepcopy(source)
    target_temp = deepcopy(target)
    source_temp.paint_uniform_color([1, 0.706, 0])
    target_temp.paint_uniform_color([0, 0.651, 0.929])
    source_temp.transform(transformation)
    o3d.visualization.draw_geometries([source_temp, target_temp],
                                      zoom=0.4459,
                                      front=[0.9288, -0.2951, -0.2242],
                                      lookat=[1.6784, 2.0612, 1.4451],
                                      up=[-0.3402, -0.9189, -0.1996])


demo_icp_pcds = o3d.data.DemoICPPointClouds()
source = o3d.io.read_point_cloud(demo_icp_pcds.paths[0])
target = o3d.io.read_point_cloud(demo_icp_pcds.paths[1])
threshold = 0.02
trans_init = np.asarray([[0.862, 0.011, -0.507, 0.5],
                         [-0.139, 0.967, -0.215, 0.7],
                         [0.487, 0.255, 0.835, -1.4], [0.0, 0.0, 0.0, 1.0]])
draw_registration_result(source, target, trans_init)

print("Initial alignment")
evaluation = o3d.pipelines.registration.evaluate_registration(
    source, target, threshold, trans_init)
print(evaluation)

Initial alignment
RegistrationResult with fitness=1.747228e-01, inlier_rmse=1.177106e-02, and correspondence_set size of 34741
Access transformation to get result.

3点对点ICP(Point-to-point ICP ) 3.1原理

通常情况下，ICP算法迭代两个步骤:
（1）从目标点云P中找对应集K={(p,q)}，用当前变换矩阵T变换源点云Q。
（2）通过对应集合K上定义的，最小化目标函数E(T)，来更新变换矩阵T。

Different variants of ICP use different objective functions E(T)E(T) [BeslAndMcKay1992] [ChenAndMedioni1992] [Park2017].

我们首先展示了使用目标的点对点ICP算法[BeslAndMcKay1992]

TransformationEstimationPointToPoint类提供函数来计算点对点ICP目标的残差和雅可比矩阵。函数registration_icp将其作为参数并运行点对点ICP以获得结果。

3.2 代码测试

（1）测试代码

import open3d as o3d
import numpy as np
from copy import deepcopy

# #（一）先简单看看
# demo_icp_pcds = o3d.data.DemoICPPointClouds()
# source = o3d.io.read_point_cloud(demo_icp_pcds.paths[0])
# target = o3d.io.read_point_cloud(demo_icp_pcds.paths[1])

# o3d.visualization.draw_geometries([source,target])


#（二）粗略配准
def draw_registration_result(source, target, transformation):
    # source_temp = copy.deepcopy(source)
    # target_temp = copy.deepcopy(target)
    source_temp = deepcopy(source)
    target_temp = deepcopy(target)
    source_temp.paint_uniform_color([1, 0.706, 0])
    target_temp.paint_uniform_color([0, 0.651, 0.929])
    source_temp.transform(transformation)
    o3d.visualization.draw_geometries([source_temp, target_temp],
                                      zoom=0.4459,
                                      front=[0.9288, -0.2951, -0.2242],
                                      lookat=[1.6784, 2.0612, 1.4451],
                                      up=[-0.3402, -0.9189, -0.1996])


demo_icp_pcds = o3d.data.DemoICPPointClouds()
source = o3d.io.read_point_cloud(demo_icp_pcds.paths[0])
target = o3d.io.read_point_cloud(demo_icp_pcds.paths[1])
threshold = 0.02
trans_init = np.asarray([[0.862, 0.011, -0.507, 0.5],
                         [-0.139, 0.967, -0.215, 0.7],
                         [0.487, 0.255, 0.835, -1.4], [0.0, 0.0, 0.0, 1.0]])
draw_registration_result(source, target, trans_init)

print("Initial alignment")
evaluation = o3d.pipelines.registration.evaluate_registration(
    source, target, threshold, trans_init)
print(evaluation)

print("Apply point-to-point ICP")
reg_p2p = o3d.pipelines.registration.registration_icp(
    source, target, threshold, trans_init,
    o3d.pipelines.registration.TransformationEstimationPointToPoint())
print(reg_p2p)
print("Transformation is:")
print(reg_p2p.transformation)
draw_registration_result(source, target, reg_p2p.transformation)

（2）展示的结果

（3）改进

适应度（fitness）分数从0.174723增加到0.372450。inlier_rmse从0.011771减少到0.007760。默认情况下，registration_icp运行直到收敛或达到大迭代次数(默认为30)。可以更改它以允许更多的计算时间并进一步改进结果。

（4）改进的参数设置

o3d.pipelines.registration.ICPConvergenceCriteria(max_iteration=2000)

（5）测试代码

import open3d as o3d
import numpy as np
from copy import deepcopy

# #（一）先简单看看
# demo_icp_pcds = o3d.data.DemoICPPointClouds()
# source = o3d.io.read_point_cloud(demo_icp_pcds.paths[0])
# target = o3d.io.read_point_cloud(demo_icp_pcds.paths[1])

# o3d.visualization.draw_geometries([source,target])


#（二）粗略配准
def draw_registration_result(source, target, transformation):
    # source_temp = copy.deepcopy(source)
    # target_temp = copy.deepcopy(target)
    source_temp = deepcopy(source)
    target_temp = deepcopy(target)
    source_temp.paint_uniform_color([1, 0.706, 0])
    target_temp.paint_uniform_color([0, 0.651, 0.929])
    source_temp.transform(transformation)
    o3d.visualization.draw_geometries([source_temp, target_temp],
                                      zoom=0.4459,
                                      front=[0.9288, -0.2951, -0.2242],
                                      lookat=[1.6784, 2.0612, 1.4451],
                                      up=[-0.3402, -0.9189, -0.1996])


demo_icp_pcds = o3d.data.DemoICPPointClouds()
source = o3d.io.read_point_cloud(demo_icp_pcds.paths[0])
target = o3d.io.read_point_cloud(demo_icp_pcds.paths[1])
threshold = 0.02
trans_init = np.asarray([[0.862, 0.011, -0.507, 0.5],
                         [-0.139, 0.967, -0.215, 0.7],
                         [0.487, 0.255, 0.835, -1.4], [0.0, 0.0, 0.0, 1.0]])
draw_registration_result(source, target, trans_init)

print("Initial alignment")
evaluation = o3d.pipelines.registration.evaluate_registration(
    source, target, threshold, trans_init)
print(evaluation)

print("Apply point-to-point ICP")
reg_p2p = o3d.pipelines.registration.registration_icp(
    source, target, threshold, trans_init,
    o3d.pipelines.registration.TransformationEstimationPointToPoint())
print(reg_p2p)
print("Transformation is:")
print(reg_p2p.transformation)
draw_registration_result(source, target, reg_p2p.transformation)

reg_p2p = o3d.pipelines.registration.registration_icp(
    source, target, threshold, trans_init,
    o3d.pipelines.registration.TransformationEstimationPointToPoint(),
    o3d.pipelines.registration.ICPConvergenceCriteria(max_iteration=2000))
print(reg_p2p)
print("Transformation is:")
print(reg_p2p.transformation)
draw_registration_result(source, target, reg_p2p.transformation)

果然，2000步迭代后，果然匹配的漂亮了很多

计算得到的变换矩阵也更精确了

4、点对面ICP(Point-to-plane ICP ) 4.1原理

点到平面的ICP算法[ChenAndMedioni1992]使用了不同的目标函数

其中np为点p的法线。[Rusinkiewicz2001]证明了点到面ICP算法比点到点ICP算法具有更快的收敛速度。

registration_icp调用了使用不同的参数TransformationEstimationPointToPlane。在内部，这个类实现函数来计算残差和点到平面的ICP目标的雅可比矩阵。

4.2 测试代码

（1）代码

import open3d as o3d
import numpy as np
from copy import deepcopy

# #（一）先简单看看
# demo_icp_pcds = o3d.data.DemoICPPointClouds()
# source = o3d.io.read_point_cloud(demo_icp_pcds.paths[0])
# target = o3d.io.read_point_cloud(demo_icp_pcds.paths[1])

# o3d.visualization.draw_geometries([source,target])


#（二）粗略配准
def draw_registration_result(source, target, transformation):
    # source_temp = copy.deepcopy(source)
    # target_temp = copy.deepcopy(target)
    source_temp = deepcopy(source)
    target_temp = deepcopy(target)
    source_temp.paint_uniform_color([1, 0.706, 0])
    target_temp.paint_uniform_color([0, 0.651, 0.929])
    source_temp.transform(transformation)
    o3d.visualization.draw_geometries([source_temp, target_temp],
                                      zoom=0.4459,
                                      front=[0.9288, -0.2951, -0.2242],
                                      lookat=[1.6784, 2.0612, 1.4451],
                                      up=[-0.3402, -0.9189, -0.1996])


demo_icp_pcds = o3d.data.DemoICPPointClouds()
source = o3d.io.read_point_cloud(demo_icp_pcds.paths[0])
target = o3d.io.read_point_cloud(demo_icp_pcds.paths[1])
threshold = 0.02
trans_init = np.asarray([[0.862, 0.011, -0.507, 0.5],
                         [-0.139, 0.967, -0.215, 0.7],
                         [0.487, 0.255, 0.835, -1.4], [0.0, 0.0, 0.0, 1.0]])
# draw_registration_result(source, target, trans_init)

# print("Initial alignment")
# evaluation = o3d.pipelines.registration.evaluate_registration(
#     source, target, threshold, trans_init)
# print(evaluation)

#（三）点对点配准
# print("Apply point-to-point ICP")
# reg_p2p = o3d.pipelines.registration.registration_icp(
#     source, target, threshold, trans_init,
#     o3d.pipelines.registration.TransformationEstimationPointToPoint())
# print(reg_p2p)
# print("Transformation is:")
# print(reg_p2p.transformation)
# draw_registration_result(source, target, reg_p2p.transformation)

# reg_p2p = o3d.pipelines.registration.registration_icp(
#     source, target, threshold, trans_init,
#     o3d.pipelines.registration.TransformationEstimationPointToPoint(),
#     o3d.pipelines.registration.ICPConvergenceCriteria(max_iteration=2000))
# print(reg_p2p)
# print("Transformation is:")
# print(reg_p2p.transformation)
# draw_registration_result(source, target, reg_p2p.transformation)



#（四）平面配准
print("Apply point-to-plane ICP")
reg_p2l = o3d.pipelines.registration.registration_icp(
    source, target, threshold, trans_init,
    o3d.pipelines.registration.TransformationEstimationPointToPlane())
print(reg_p2l)
print("Transformation is:")
print(reg_p2l.transformation)
draw_registration_result(source, target, reg_p2l.transformation)

（2）测试结果图

点到平面的ICP在30次迭代中达到紧密对齐(适合度评分为0.620972,inlier_rmse评分为0.006581)。效果还很不错 

Apply point-to-plane ICP
RegistrationResult with fitness=6.209722e-01, inlier_rmse=6.581453e-03, and correspondence_set size of 123471

注意：点到平面的ICP算法使用点法线。在本教程中，我们从文件加载法线。如果没有给出法线，可以用顶点法线估计来计算。

你是否还在寻找稳定的海外服务器提供商？创新互联www.cdcxhl.cn海外机房具备T级流量清洗系统配攻击溯源，准确流量调度确保服务器高可用性，企业级服务器适合批量采购，新人活动首月15元起，快前往官网查看详情吧


网页题目：（8）点云数据处理学习——ICPregistration（迭代最近点）-创新互联
本文网址：http://cxhlcq.com/article/cepdsi.html

其他资讯

全国免费咨询:

400-028-6601

业务咨询：028-86922220 / 13518219792

节假值班：18980820575 / 13518219792

联系地址：成都市太升南路288号锦天国际A幢1002号

Copyright © 成都创新互联科技有限公司重庆分公司 渝ICP备2021005571号
友情链接:： 成都网站建设 重庆网站建设 四川网站建设 重庆建设网站 移动服务器托管 成都服务器托管 云服务器 广告设计制作 重庆网页设计 重庆做网站 重庆网站制作 重庆网站建设 重庆网站公司 渝中网站制作 重庆网站设计

在线咨询

微信咨询

电话咨询

028-86922220（工作日）

18980820575（7×24）

提交需求

返回顶部