4nagios自定义监测脚本

这里举几个例子。

为栖霞等地区用户提供了全套网页设计制作服务，及栖霞网站建设行业解决方案。主营业务为成都网站制作、网站设计、外贸网站建设、栖霞网站设计，以传统方式定制建设网站，并提供域名空间备案等一条龙服务，秉承以专业、用心的态度为用户提供真诚的服务。我们深信只要达到每一位用户的要求，就会得到认可，从而选择与我们长期合作。这样，我们也可以走得更远！

http连接并发监测

在某地的双向系统中，两台服务器有一个httpd服务器，通过负载均衡承担4万多的机顶盒的首页面访问。因此，需要监测每台服务器的http连接数量。对并发量关注一段时期，如果并发量在设置的值之内，则不需要进行并发量的调整，而如果并发量比较大的话，则需要进行调整httpd参数。

http的连接数量可以通过ps -ef | grep httpd | wc -l来获取。Centos5版本默认的文件打开数量为1024。对/etc/httpd/conf/httpd.conf进行参数调整，使httpd可以承担1000个并发：

查询默认的服务方式：

# httpd -l

Compiled in modules:

core.c

prefork.c

http_core.c

mod_so.c

默认的服务方式为prefork，调整/etc/httpd/conf/httpd.conf参数（具体含义可到网上查找）：

StartServers 10

MinSpareServers 50

MaxSpareServers 100

ServerLimit 3000

MaxClients 3000

MaxRequestsPerChild 10000

重启httpd后，进行并发测试：

ab -n 10000 -c 1000 http://172.16.100.190/index.htm

这里共发送10000个请求，每次发送1000个，也就是每次并发1000个，共分10次发送。

4 nagios 自定义监测脚本

如果是并发2000，则报错：

4 nagios 自定义监测脚本

查询httpd的服务方式为：

ps -ef | grep httpd | wc -l

编写监测脚本：

#!/bin/bash

STATE_OK=0

STATE_WARNING=1

STATE_CRITICAL=2

STATE_UNKNOWN=3

count=`ps -ef | grep httpd | wc -l`

let "count =count-2"

if [ $count -gt 800 ]; then

echo "Critical ! httpd processes is $count!|HttpCounts=$count;600;800;0"

exit $STATE_CRITICAL

elif [ $count -gt 600 ]; then

echo "Warning ! httpd processes is $count!|HttpCounts=$count;600;800;0"

exit $STATE_WARNING

elif [ 600 -gt $count ]; then

echo "Ok ! httpd processes is $count!|HttpCounts=$count;600;800;0"

exit $STATE_OK

else

echo "Unknow"

exit $STATE_UNKNOWN

脚本中echo一行最后添加的“|HttpCounts=$count;600;800;0”是pnp画图所需，否则不能画出图。其中600为预警，800为严重告警。

TIME_WAIT监测

默认配置的httpd，在访问量比较大的话，使用命令：

# netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'

TIME_WAIT=581

ESTABLISHED=1

SYN_RECV=1

就会有大量的time_wait。可以通过调整系统参数得到改善：

http://blog.csdn.net/sunvince/article/details/6622796

http://chembo.iteye.com/blog/1503770

这里，在/etc/sysctl.conf增加以下4个参数：

net.ipv4.tcp_syncookies = 1 //这个参数如果已经添加了的话，就不需要再次添加
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_fin_timeout = 30

然后执行 /sbin/sysctl -p 让参数生效。

继续使用netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'，观察到TIME_WAIT=3了。

可以根据下节中监测物理内存的check_mem脚本规范编写监测 TIME_WAIT的脚本：

#more /usr/local/nagios/libexec/check_timewait

#!/bin/bash

#netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'

#TIME_WAIT 641

#ESTABLISHED 1

#SYN_RECV 1

if [ $# != 4 ];then

echo "Usage:$0 -w num1 -c num2"

exit

time_wait=`netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'|grep TIME_WAIT|awk '{print $2}'`

established=`netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'|grep ESTABLISHED|awk '{print $2}'`

syn_recv=`netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'|grep SYN_RECV|awk '{print $2}'`

if [ $time_wait -gt $4 ];then

echo "Critical - TIME_WAIT=$time_wait ESTABLISHED=$established SYN_RECV=$syn_recv|TIME_WAIT=$time_wait;$2;$4;0 ESTABLISHED=$established;;; SYN_RECV=$syn_recv;;;"

exit 2

if [ $time_wait -le $4 -a $time_wait -ge $2 ];then

echo "Warning - TIME_WAIT=$time_wait ESTABLISHED=$established SYN_RECV=$syn_recv |TIME_WAIT=$time_wait;$2;$4;0 ESTABLISHED=$established;;; SYN_RECV=$syn_recv;;;"

exit 1

if [ $time_wait -lt $2 ];then

echo "OK - TIME_WAIT=$time_wait ESTABLISHED=$established SYN_RECV=$syn_recv |TIME_WAIT=$time_wait;$2;$4;0 ESTABLISHED=$established;;; SYN_RECV=$syn_recv;;;"

exit 0

路由监测

另外，由于这台机器不能丢失一个默认的路由，否则机顶盒无法获取首页面。默认的路由也可以编写脚本进行监测：

#!/bin/bash

STATE_OK=0

STATE_WARNING=1

STATE_CRITICAL=2

STATE_UNKNOWN=3

default_route=`route |grep default`

if [ "default 172.16.100.1 0.0.0.0 UG 0 0 0 bond0"x = "$default_route"x ]; then

echo "Ok! Default route is \"$default_route\"!|defaultRoute=1;0;0"

exit $STATE_OK

else

echo "Critical! Default route is \"$default_route\"!|defaultRoute=0;0;0"

exit $STATE_CRITICAL

物理内存监测

默认的check_swap为监测虚拟内存，如果要监测物理内存，则可以编写以下脚本：

#cd /usr/local/nagios/libexec

#vi check_mem

#!/bin/bash

#memory

if [ $# != 4 ];then

echo "Usage:$0 -w num1 -c num2"

exit

total_mem=`free -m |grep Mem|awk '{print $2}'`

free_mem=`free -m |grep Mem|awk '{print $4}'`

used_mem=`free -m |grep Mem|awk '{print $3}'`

if [ $free_mem -gt $2 ];then

echo "OK - total memory $total_mem MB used $used_mem MB free $free_mem MB|free_mem=$free_mem;$2;$4;0"

exit 0

if [ $free_mem -ge $4 -a $free_mem -le $1 ];then

echo "Warning - total memory $total_mem MB used $used_mem MB free $free_mem MB|free_mem=$free_mem;$2;$4;0"

exit 1

if [ $free_mem -lt $4 ];then

echo "Critical - total memory $total_mem MB used $used_mem MB free $free_mem MB|free_mem=$free_mem;$2;$4;0"

exit 2

#chown -R nagios.nagios check_mem

#chmod a+x check_mem

#./check_mem -w 200 -c 100 //后面两个参数表示剩余内存容量，单位为兆。

网上还有另外一个监测脚本也可以参考 http://www.yunvn.com/thread-5136-1-5.html ：

#script to check real memory usage

# L.Gill 02/05/06 - V.1.0

# ------------------------------------------

# ######## Script Modifications ##########

# ------------------------------------------

# Who When What

# --- ---- ----

# LGill 17/05/06 "$percent" lt 1% fix - sed edits dc result beggining with "."

#!/bin/bash

USAGE="`basename $0` [-w|--warning] [-c|--critical]"

THRESHOLD_USAGE="WARNING threshold must be greater than CRITICAL: `basename $0` $*"

calc=/tmp/memcalc

percent_free=/tmp/mempercent

critical=""

warning=""

STATE_OK=0

STATE_WARNING=1

STATE_CRITICAL=2

STATE_UNKNOWN=3

# print usage

if [[ $# -lt 4 ]]

then

echo ""

echo "Wrong Syntax: `basename $0` $*"

echo ""

echo "Usage: $USAGE"

echo ""

exit 0

# read input

while [[ $# -gt 0 ]]

case "$1" in

-w|--warning)

shift

warning=$1

;;

-c|--critical)

shift

critical=$1

;;

esac

shift

done

# verify input

if [[ $warning -eq $critical || $warning -lt $critical ]]

then

echo ""

echo "$THRESHOLD_USAGE"

echo ""

echo "Usage: $USAGE"

echo ""

exit 0

# Total memory available

total=`free -m | head -2 |tail -1 |gawk '{print $2}'`

# Total memory used

used=`free -m | head -2 |tail -1 |gawk '{print $3}'`

# Calc total minus used

free=`free -m | head -2 |tail -1 |gawk '{print $4+$7}'`

# normal values

#echo "$total"MB total

#echo "$used"MB used

#echo "$free"MB free

# make it into % percent free = ((free mem / total mem) * 100)

echo "5" > $calc # decimal accuracy

echo "k" >> $calc # commit

echo "100" >> $calc # multiply

echo "$free" >> $calc # division integer

echo "$total" >> $calc # division integer

echo "/" >> $calc # division sign

echo "*" >> $calc # multiplication sign

echo "p" >> $calc # print

percent=`/usr/bin/dc $calc|/bin/sed 's/^\./0./'|/usr/bin/tr "." " "|/usr/bin/gawk {'print $1'}`

#percent1=`/usr/bin/dc $calc`

#echo "$percent1"

if [[ "$percent" -le $critical ]]

then

echo "CRITICAL - $free MB ($percent%) Free Memory"

exit 2

if [[ "$percent" -le $warning ]]

then

echo "WARNING - $free MB ($percent%) Free Memory"

exit 1

if [[ "$percent" -gt $warning ]]

then

echo "OK - $free MB ($percent%) Free Memory"

exit 0

用以下命令执行：

# ./check_memory -w 36 -c 10

OK - 185 MB (37%) Free Memory

# ./check_memory -w 37 -c 10

WARNING - 185 MB (37%) Free Memory

# ./check_memory -w 40 -c 37

CRITICAL - 184 MB (37%) Free Memory

-w表示低于多少百分比就预警，-c表示低于多少百分比就严重告警

网页名称：4nagios自定义监测脚本
当前地址：http://cxhlcq.com/article/iisehe.html

4nagios自定义监测脚本

http连接并发监测

TIME_WAIT监测

路由监测

物理内存监测

其他资讯

网站制作

企业服务

网站建设

服务器托管