这篇文章主要为大家展示了“如何部署Ubuntu20.04 + k8s 1.21.0开发环境”，内容简而易懂，条理清晰，希望能够帮助大家解决疑惑，下面让小编带领大家一起研究并学习一下“如何部署Ubuntu20.04 + k8s 1.21.0开发环境”这篇文章吧。
站在用户的角度思考问题，与客户深入沟通，找到四平网站设计与四平网站推广的解决方案，凭借多年的经验，让设计与互联网技术结合，创造个性化、用户体验好的作品，建站类型包括：成都网站设计、做网站、企业官网、英文网站、手机端网站、网站推广、域名与空间、网络空间、企业邮箱。业务覆盖四平地区。
Kubeflow 部署（使用 kfctl_k8s_istio）
安装 Kubeflow的一些指南（使用 kfctl_k8s_istio 配置部署到已有的Kubernetes集群中）。该配置清单创建Kubeflow的核心部件部署，但不包括外部依赖，可以根据您的环境需要进行优化。KubeFlow 1.2.0部署到Ubuntu20.04和k8s 1.21.0，其它平台可能有些变化。
该Kubeflow deployment要求 StorageClass 支持 dynamic volume provisioner。确认缺省的StorageClass的 provisioner 域的设置。如果换没有 provisioner, 确保配置了 volume provisioning，按照下面的描述在 Kubernetes cluster 进行设置（参考 below）。
使用 kfctl_k8s_istio.v1.2.0.yaml 配置安装，需要考虑下面的选项：
准备环境
下载 kfctl 的 Kubeflow CLI 工具，然后手动设置环境变量：
wget https://github.com/kubeflow/kfctl/releases/download/v1.2.0/kfctl_v1.2.0-0-gbc038f9_linux.tar.gz
tar -vxf kfctl_v1.2.0-0-gbc038f9_linux.tar.gz
sudo cp kfctl /usr/bin/
# The following command is optional. It adds the kfctl binary to your path.# If you don't add kfctl to your path, you must use the full path# each time you run kfctl.# Use only alphanumeric characters or - in the directory name.export PATH=$PATH:""##实际如下：##export PATH=$PATH:"/home/supermap/openthings/kubeflow"# Set KF_NAME to the name of your Kubeflow deployment. You also use this# value as directory name when creating your configuration directory.# For example, your deployment name can be 'my-kubeflow' or 'kf-test'.export KF_NAME=##实际如下：##export KF_NAME="kubeflow"# Set the path to the base directory where you want to store one or more # Kubeflow deployments. For example, /opt/.# Then set the Kubeflow application directory for this deployment.export BASE_DIR=export KF_DIR=${BASE_DIR}/${KF_NAME}##实际如下：##export BASE_DIR="/home/supermap/openthings/"##export KF_DIR=${BASE_DIR}/${KF_NAME}# Set the configuration file to use when deploying Kubeflow.# The following configuration installs Istio by default. Comment out # the Istio components in the config file to skip Istio installation. # See https://github.com/kubeflow/kubeflow/pull/3663export CONFIG_URI="https://raw.githubusercontent.com/kubeflow/manifests/v1.2-branch/kfdef/kfctl_k8s_istio.v1.2.0.yaml"##实际如下：##export CONFIG_URI=${BASE_DIR}/${KF_NAME}/kfctl_k8s_istio.v1.2.0.yaml
注意:
${KF_NAME}- Kubeflow 部署的名称。如果要定制部署的 deployment name，通过该参数指定。例如, my-kubeflow 或 kf-test。该 KF_NAME 必须小写字母或者 ‘-', 开始和结束必须为字母。该变量不能超过 25 个字符。只能包含名称，不能包含目录路径。同时将作为创建目录的名称，用于保存 Kubeflow configurations，即Kubeflow application directory。
${KF_DIR}- Kubeflow application directory的全路径。
${CONFIG_URI}-该 GitHub address，位于 https://raw.githubusercontent.com/kubeflow/manifests/v1.2-branch/kfdef/kfctl_k8s_istio.v1.2.0.yaml。当运行kfctl apply 或 kfctl build (see the next step), kfctl 创建一个 YAML 文件的本地版本，可以进一步定制化。
⚠️注意：
repos:
- name: manifests
uri: /home/supermap/openthings/kubeflow/v1.2.0.tar.gz
version: v1.2-branch
设置和部署 Kubeflow
使用缺省设置来设置和部署 Kubeflow using the default settings，运行 kfctl apply 如下：
mkdir -p ${KF_DIR}
cd ${KF_DIR}
kfctl apply -V -f ${CONFIG_URI}检查 resources deployed in namespace kubeflow:
kubectl -n kubeflow get all
可选，设置以后部署的配置参数：
在部署 Kubeflow时，如果需要定制安装参数，可以编辑该配置文件，然后运行 Kubeflow的部署命令即可：
运行 kfctl build 命令设置安装参数：
mkdir -p ${KF_DIR}
cd ${KF_DIR}
kfctl build -V -f ${CONFIG_URI}编辑配置文件，描述如上 customizing your Kubeflow deployment。
设置环境变量指向本地的配置文件：
export CONFIG_FILE=${KF_DIR}/kfctl_k8s_istio.v1.2.0.yaml运行 kfctl apply 目录实施 Kubeflow 部署：
kfctl apply -V -f ${CONFIG_FILE}
出现错误：
2021/04/28 10:24:44 absolute path error in '/home/supermap/openthings/kubeflow/.cache/manifests/namespaces/base' : evalsymlink failure on '/home/supermap/openthings/kubeflow/.cache/manifests/namespaces/base' : lstat /home/supermap/openthings/kubeflow/.cache/manifests/namespaces: no such file or directory
ERRO[0000] Error evaluating kustomization manifest for namespaces: accumulating resources: accumulating resources from '../../.cache/manifests/namespaces/base': open /home/supermap/openthings/kubeflow/.cache/manifests/namespaces/base: no such file or directory filename="kustomize/kustomize.go:155"
Error: failed to apply: (kubeflow.error): Code 500 with message: kfApp Apply failed for kustomize: (kubeflow.error): Code 500 with message: error evaluating kustomization manifest for namespaces: accumulating resources: accumulating resources from '../../.cache/manifests/namespaces/base': open /home/supermap/openthings/kubeflow/.cache/manifests/namespaces/base: no such file or directory
cd manifests-1.2.0
mv -r * ../
apiVersion: kfdef.apps.kubeflow.org/v1
kind: KfDef
metadata:
creationTimestamp: null
namespace: kubeflow
spec:
applications:
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/namespaces/base
name: namespaces
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/application/v3
name: application
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/stacks/kubernetes/application/istio-1-3-1-stack
name: istio-stack
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/stacks/kubernetes/application/cluster-local-gateway-1-3-1
name: cluster-local-gateway
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/istio/istio/base
name: istio
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/stacks/kubernetes/application/cert-manager-crds
name: cert-manager-crds
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/stacks/kubernetes/application/cert-manager-kube-system-resources
name: cert-manager-kube-system-resources
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/stacks/kubernetes/application/add-anonymous-user-filter
name: add-anonymous-user-filter
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/metacontroller/base
name: metacontroller
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/admission-webhook/bootstrap/overlays/application
name: bootstrap
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/stacks/kubernetes/application/spark-operator
name: spark-operator
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/stacks/kubernetes
name: kubeflow-apps
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/knative/installs/generic
name: knative
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/kfserving/installs/generic
name: kfserving
- kustomizeConfig:
repoRef:
name: manifests
path: manifests-1.2.0/stacks/kubernetes/application/spartakus
name: spartakus
repos:
- name: manifests
uri: /home/supermap/openthings/kubeflow/v1.2.0.tar.gz
version: v1.2-branch
status: {}KubeFlow的镜像较多，完全启动需要比较长的时间，需要耐心等待。
过段时间看，有些pod已经启动起来了，主界面已经可以访问了。
查看状态，有些镜像和服务有问题，包括镜像下载、存储卷设置等，留待后续解决。
(base) supermap@xriver02:~$ kubectl get pod -n kubeflow
NAME READY STATUS RESTARTS AGE
admission-webhook-bootstrap-stateful-set-0 0/1 ImagePullBackOff 0 36h
admission-webhook-deployment-5cd7dc96f5-l9rxl 1/1 Running 0 36h
application-controller-stateful-set-0 0/1 ImagePullBackOff 0 36h
argo-ui-657cf69ff5-kn966 1/1 Running 0 36h
cache-deployer-deployment-5f4979f45-q6psq 1/2 ImagePullBackOff 0 36h
cache-server-7859fd67f5-kx8zm 0/2 Init:0/1 0 36h
centraldashboard-86744cbb7b-44rbc 1/1 Running 0 36h
jupyter-web-app-deployment-8486d5ffff-9czzl 1/1 Running 0 36h
katib-controller-7fcc95676b-tsbzx 1/1 Running 1 36h
katib-db-manager-67867f5498-jzrgh 0/1 Running 442 36h
katib-MySQL-6b5d848bf5-gs95h 0/1 Pending 0 36h
katib-ui-65dc4cf6f5-pqj5p 1/1 Running 0 36h
kfserving-controller-manager-0 1/2 ImagePullBackOff 0 36h
kubeflow-pipelines-profile-controller-797fb44db9-vznlv 1/1 Running 0 36h
metacontroller-0 1/1 Running 0 36h
metadata-db-c65f4bc75-m2ggv 0/1 Pending 0 36h
metadata-envoy-deployment-67bd5954c-jl7pn 1/1 Running 0 36h
metadata-grpc-deployment-577c67c96f-29dwx 0/1 CrashLoopBackOff 433 36h
metadata-writer-756dbdd478-tlrpw 2/2 Running 325 36h
minio-54d995c97b-jrmqq 0/1 Pending 0 36h
ml-pipeline-8d6749d9c-drv2h 1/2 CrashLoopBackOff 662 36h
ml-pipeline-persistenceagent-d984c9585-mhstn 2/2 Running 0 36h
ml-pipeline-scheduledworkflow-5ccf4c9fcc-wqg4d 2/2 Running 0 36h
ml-pipeline-ui-8ccbf585c-77krb 2/2 Running 0 36h
ml-pipeline-viewer-crd-56c68f6c85-bssgc 1/2 ImagePullBackOff 0 36h
ml-pipeline-visualizationserver-7446b96877-ffs7b 2/2 Running 0 36h
mpi-operator-d5bfb8489-75m6b 1/1 Running 0 36h
mxnet-operator-7576d697d6-jwks8 1/1 Running 0 36h
mysql-74f8f99bc8-ndzqg 0/2 Pending 0 36h
notebook-controller-deployment-dd4c74b47-k9fng 0/1 ImagePullBackOff 0 36h
profiles-deployment-65f54cb5c4-9xtws 0/2 ImagePullBackOff 0 36h
pytorch-operator-847c8d55d8-x6l4t 0/1 ImagePullBackOff 0 36h
seldon-controller-manager-6bf8b45656-d7rvf 1/1 Running 0 36h
spark-operatorsparkoperator-fdfbfd99-cst9l 0/1 ImagePullBackOff 0 36h
spartakus-volunteer-558f8bfd47-tcvpn 1/1 Running 0 36h
tf-job-operator-58477797f8-wr79t 1/1 Running 0 36h
workflow-controller-64fd7cffc5-m6gkc 1/1 Running 0 36h
访问 Kubeflow 用户界面 (UI)
Kubeflow 部署完成后，Kubeflow Dashboard 的访问通过服务 istio-ingressgateway 来获取。loadbalancer在环境中不可用，NodePort 或 Port forwarding 可以用于访问 Kubeflow Dashboard，参考 Ingress Gateway guide 或者：
为私有Kubernetes集群创建LoadBalancer服务
Kubernetes dashboard 通过 Ingress 提供HTTPS访问
Kubernetes负载均衡器-Nginx ingress安装
删除 Kubeflow
运行下面的命令删除部署并回收资源：
cd ${KF_DIR}# If you want to delete all the resources, run:kfctl delete -f ${CONFIG_FILE}理解部署过程
kfctl 部署过程包含下面几个命令：
应用的布局
您的 Kubeflow 应用目录 ${KF_DIR}包含下面的文件和目录：
建议将${KF_DIR} 目录中的内容纳入版本管理系统。
Provisioning of Persistent Volumes in Kubernetes
如果已经有 dynamic volume provisioner，可以跳过本步骤
问题解决
Persistent Volume Claims 处于 Pending 状态
检查PersistentVolumeClaims 是否 Bound 到 PersistentVolumes，如下：
kubectl -n kubeflow get pvc
如果PersistentVolumeClaims (PVCs) 在 Pending 状态，部署后没有bound 到 PersistentVolumes (PVs)，就需要手动为每一个PVC创建PV，或者安装 dynamic volume provisioning 来按需创建PVs ，以及删除存在的PVCs然后重新部署 Kubeflow。
以上是“如何部署Ubuntu20.04 + k8s 1.21.0开发环境”这篇文章的所有内容，感谢各位的阅读！相信大家都有了一定的了解，希望分享的内容对大家有所帮助，如果还想学习更多知识，欢迎关注创新互联行业资讯频道！
新闻名称：如何部署Ubuntu20.04+k8s1.21.0开发环境
链接地址：
http://cxhlcq.com/article/ijcoic.html
重庆分公司
重庆分公司
