配置RIP实现全网互通的实例分析

本篇文章给大家分享的是有关配置RIP实现全网互通的实例分析，小编觉得挺实用的，因此分享给大家学习，希望大家阅读完这篇文章后可以有所收获，话不多说，跟着小编一起来看看吧。

成都创新互联公司公司2013年成立，是专业互联网技术服务公司，拥有项目网站设计制作、做网站网站策划，项目实施与项目整合能力。我们以让每一个梦想脱颖而出为使命，1280元寒亭做网站,已为上家服务,为寒亭各地企业和个人服务,联系电话:18980820575

实验名称：华为配置RIP实现全网互通
实验目的：配置RIP实现全网互通
实验拓扑：

实验需求：两台PC机，四台路由器
实验步骤：

1. 配置pc机
   
   

2. 配置路由器接口IP
   R1：
   sys
   Enter system view, return user view with Ctrl+Z.
   [Huawei]sysname R1
   [R1]interface GigabitEthernet 0/0/0
   [R1-GigabitEthernet0/0/0]undo shutdown
   Info: Interface GigabitEthernet0/0/0 is not shutdown.
   [R1-GigabitEthernet0/0/0]ip address 192.168.10.254 255.255.255.0
   Jan 10 2018 17:30:36-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
   on the interface GigabitEthernet0/0/0 has entered the UP state.
   [R1-GigabitEthernet0/0/0]quit
   [R1]interface GigabitEthernet 0/0/1
   Info: Interface GigabitEthernet0/0/1 is not shutdown.
   [R1-GigabitEthernet0/0/1]ip address 192.168.12.1 255.255.255.0
   Jan 10 2018 17:31:00-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
   on the interface GigabitEthernet0/0/1 has entered the UP state.
   [R1-GigabitEthernet0/0/1]quit

R2：
sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R2
[R2]interface GigabitEthernet 0/0/0
[R2-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R2-GigabitEthernet0/0/0]ip address 192.168.12.2 255.255.255.0
Jan 10 2018 17:31:37-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R2-GigabitEthernet0/0/0]quit
[R2]interface GigabitEthernet 0/0/1
[R2-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R2-GigabitEthernet0/0/1]ip address 192.168.23.2 255.255.255.0
Jan 10 2018 17:32:00-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R2-GigabitEthernet0/0/1]quit

R3：
system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R3
[R3]interface GigabitEthernet 0/0/0
[R3-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R3-GigabitEthernet0/0/0]ip address 192.168.23.3 255.255.255.0
Jan 10 2018 17:32:39-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R3-GigabitEthernet0/0/0]quit
[R3]interface GigabitEthernet 0/0/1
[R3-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R3-GigabitEthernet0/0/1]ip address 192.168.34.3 255.255.255.0
Jan 10 2018 17:32:58-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R3-GigabitEthernet0/0/1]quit

R4：
system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R4
[R4]interface GigabitEthernet 0/0/0
[R4-GigabitEthernet0/0/0]undo shutdown
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R4-GigabitEthernet0/0/0]ip address 192.168.34.4 255.255.255.0
Jan 10 2018 17:33:27-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R4-GigabitEthernet0/0/0]quit
[R4]interface GigabitEthernet 0/0/1
[R4-GigabitEthernet0/0/1]undo shutdown
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R4-GigabitEthernet0/0/1]ip address 192.168.20.254 255.255.255.0
Jan 10 2018 17:33:45-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R4-GigabitEthernet0/0/1]quit
[R4]

3. 配置rip协议
   R1：
   [R1]rip
   [R1-rip-1]version 2
   [R1-rip-1]network 192.168.10.0
   [R1-rip-1]network 192.168.12.0
   [R1-rip-1]exit
   R2：
   [R2]rip
   [R2-rip-1]version 2
   [R2-rip-1]network 192.168.12.0
   [R2-rip-1]network 192.168.23.0
   [R2-rip-1]quit
   R3：
   [R3]rip
   [R3-rip-1]version 2
   [R3-rip-1]network 192.168.23.0
   [R3-rip-1]network 192.168.34.0
   [R3-rip-1]quit
   R4：
   [R4]rip
   [R4-rip-1]version 2
   [R4-rip-1]network 192.168.34.0
   [R4-rip-1]network 192.168.20.0
   [R4-rip-1]quit
   测试与验证：
   a. 测试连通性：
   

        b. 查看rip id的路由表

   
   
   

   

实验总结：
华为配置rip步骤：
1.启用RIP协议
[Router]rip [id] // 如果不写后面的id，默认是1；
2.配置路由器使用 RIP 版本2
[Router-rip-1]version 2 // 在华为中，启用RIPv2以后，默认关闭了自动汇总；
3.[Router-rip-1]network x.x.x.x
附带：
华为模拟器中自动汇总在选择RIP version 2之后是自动关闭的，与思科不同

以上就是配置RIP实现全网互通的实例分析，小编相信有部分知识点可能是我们日常工作会见到或用到的。希望你能通过这篇文章学到更多知识。更多详情敬请关注创新互联行业资讯频道。