这篇文章给大家分享的是有关MySQL如何使用sysbench做OLTP基准测试的内容。小编觉得挺实用的，因此分享给大家做个参考，一起跟随小编过来看看吧。
创新互联专注于网站建设|成都网站维护|优化|托管以及网络推广，积累了大量的网站设计与制作经验，为许多企业提供了网站定制设计服务，案例作品覆盖成都边坡防护网等行业。能根据企业所处的行业与销售的产品，结合品牌形象的塑造，量身建设品质网站。
一、 安装
① 下载源码包：https://dev.mysql.com/downloads/benchmarks.html
② 安装依赖 yum -y install automake autoconf libtool
③tar xzvf sysbench-0.4.12.10.tar.gz; cd sysbench-0.4.12.10/
④./autogen.sh; ./configure
⑤ make && make install
然后我们可以在sysbench 目录看到可以执行文件sysbench了
二、命令
首先看下命令基本用法
root@10.30.5.2:sysbench# ./sysbench --help
Usage:
sysbench [general-options]... --test= [test-options]... command
General options:
--num-threads=N number of threads to use [1]
--max-requests=N limit for total number of requests [10000]
--max-time=N limit for total execution time in seconds [0]
--forced-shutdown=STRING amount of time to wait after --max-time before forcing shutdown [off]
--thread-stack-size=SIZE size of stack per thread [32K]
--init-rng=[on|off] initialize random number generator [off]
--seed-rng=N seed for random number generator, ignored when 0 [0]
--tx-rate=N target transaction rate (tps) [0]
--tx-jitter=N target transaction variation, in microseconds [0]
--report-interval=N periodically report intermediate statistics with a specified interval in seconds. 0 disables intermediate reports [0]
--report-checkpoints=[LIST,...]dump full statistics and reset all counters at specified points in time. The argument is a list of comma-separated values representing the amount of time in seconds elapsed from start of test when report checkpoint(s) must be performed. Report checkpoints are off by default. []
--test=STRING test to run
--debug=[on|off] print more debugging info [off]
--validate=[on|off] perform validation checks where possible [off]
--help=[on|off] print help and exit
--version=[on|off] print version and exit
Log options:
--verbosity=N verbosity level {5 - debug, 0 - only critical messages} [4]
--percentile=N percentile rank of query response times to count [95]
Compiled-in tests:
fileio - File I/O test
cpu - CPU performance test
memory - Memory functions speed test
threads - Threads subsystem performance test
mutex - Mutex performance test
oltp - OLTP test
Commands: prepare run cleanup help version
See 'sysbench --test= help' for a list of options for each test.
以上可以看到 sysbench可以测试的有 CPU 、磁盘IO、内存、线程、MUTEX 以及OLTP ，
常用参数：
--num-threads=N 并发线程数
--max-requests=N 限制压测请求总数
--max-time=N 限制压测时间
这里看下OLTP测试方法
./sysbench --test=oltp help
sysbench 0.4.12.10: multi-threaded system evaluation benchmark
oltp options:
--oltp-test-mode=STRING test type to use {simple,complex,nontrx,sp} [complex]
--oltp-reconnect-mode=STRING reconnect mode {session,transaction,query,random} [session]
--oltp-sp-name=STRING name of store procedure to call in SP test mode []
--oltp-read-only=[on|off] generate only 'read' queries (do not modify database) [off]
--oltp-avoid-deadlocks=[on|off] generate update keys in increasing order to avoid deadlocks [off]
--oltp-skip-trx=[on|off] skip BEGIN/COMMIT statements [off]
--oltp-range-size=N range size for range queries [100]
--oltp-point-selects=N number of point selects [10]
--oltp-use-in-statement=N Use IN-statement with 10 PK lookups per query [0]
--oltp-simple-ranges=N number of simple ranges [1]
--oltp-sum-ranges=N number of sum ranges [1]
--oltp-order-ranges=N number of ordered ranges [1]
--oltp-distinct-ranges=N number of distinct ranges [1]
--oltp-index-updates=N number of index update [1]
--oltp-non-index-updates=N number of non-index updates [1]
--oltp-nontrx-mode=STRING mode for non-transactional test {select, update_key, update_nokey, insert, delete} [select]
--oltp-auto-inc=[on|off] whether AUTO_INCREMENT (or equivalent) should be used on id column [on]
--oltp-connect-delay=N time in microseconds to sleep after connection to database [10000]
--oltp-user-delay-min=N minimum time in microseconds to sleep after each request [0]
--oltp-user-delay-max=N maximum time in microseconds to sleep after each request [0]
--oltp-table-name=STRING name of test table [sbtest]
--oltp-table-size=N number of records in test table [10000]
--oltp-dist-type=STRING random numbers distribution {uniform,gaussian,special} [special]
--oltp-dist-iter=N number of iterations used for numbers generation [12]
--oltp-dist-pct=N percentage of values to be treated as 'special' (for special distribution) [1]
--oltp-dist-res=N percentage of 'special' values to use (for special distribution) [75]
--oltp-point-select-mysql-handler=[on|off]Use MySQL HANDLER for point select [off]
--oltp-point-select-all-cols=[on|off] select all columns for the point-select query [off]
--oltp-secondary=[on|off] Use a secondary index in place of the PRIMARY index [off]
--oltp-num-partitions=N Number of partitions used for test table [0]
--oltp-num-tables=N Number of test tables [1]
General database options:
--db-driver=STRING specifies database driver to use ('help' to get list of available drivers)
--db-ps-mode=STRING prepared statements usage mode {auto, disable} [auto]
Compiled-in database drivers:
mysql - MySQL driver
mysql options:
--mysql-host=[LIST,...] MySQL server host [localhost]
--mysql-port=N MySQL server port [3306]
--mysql-socket=STRING MySQL socket
--mysql-user=STRING MySQL user [sbtest]
--mysql-password=STRING MySQL password []
--mysql-db=STRING MySQL database name [sbtest]
--mysql-table-engine=STRING storage engine to use for the test table {myisam,innodb,bdb,heap,ndbcluster,federated} [innodb]
--mysql-engine-trx=STRING whether storage engine used is transactional or not {yes,no,auto} [auto]
--mysql-ssl=[on|off] use SSL connections, if available in the client library [off]
--myisam-max-rows=N max-rows parameter for MyISAM tables [1000000]
--mysql-create-options=STRING additional options passed to CREATE TABLE []
说明 ：
常用参数
① 基本参数
--db-driver=mysql 对mysql进行 OLTP 基准测试
--mysql-host 、--mysql-port、--mysql-socket、--mysql-user、--mysql-password 这些是基本的参数我就不解释了
--mysql-db=xxx 压测的database，这里得指定一下
② oltp常用参数
--oltp-test-mode=complex/simple/nontrx 测试模式
--oltp-num-tables=10 oltp测试的表数量 0.4.10版本最大表数量16
--oltp-table-size=xxx 测试表的记录数
三、测试
① 测试准备：
root@10.30.5.2:sysbench#./sysbench --num-threads=64 --max-requests=200000 --test=oltp --db-driver=mysql --mysql-user=root --mysql-host=10.30.22.2 --mysql-password=x --oltp-test-mode=complex --mysql-db=tab --oltp-table-size=5000000 --oltp-num-tables=16 prepare
sysbench 0.4.12.10: multi-threaded system evaluation benchmark
Creating table 'sbtest14'...
Creating table 'sbtest7'...
Creating table 'sbtest'...
Creating table 'sbtest11'...
Creating table 'sbtest8'...
Creating table 'sbtest6'...
Creating table 'sbtest9'...
Creating table 'sbtest12'...
Creating table 'sbtest3'...
Creating table 'sbtest15'...
Creating table 'sbtest2'...
Creating table 'sbtest4'...
Creating table 'sbtest1'...
Creating table 'sbtest5'...
Creating table 'sbtest13'...
Creating table 'sbtest10'...
Creating 5000000 records in table 'sbtest11'...
Creating 5000000 records in table 'sbtest1'...
Creating 5000000 records in table 'sbtest14'...
Creating 5000000 records in table 'sbtest'...
Creating 5000000 records in table 'sbtest6'...
Creating 5000000 records in table 'sbtest2'...
Creating 5000000 records in table 'sbtest13'...
Creating 5000000 records in table 'sbtest15'...
Creating 5000000 records in table 'sbtest12'...
Creating 5000000 records in table 'sbtest4'...
Creating 5000000 records in table 'sbtest3'...
Creating 5000000 records in table 'sbtest9'...
Creating 5000000 records in table 'sbtest8'...
Creating 5000000 records in table 'sbtest10'...
Creating 5000000 records in table 'sbtest5'...
Creating 5000000 records in table 'sbtest7'...
② 测试结果
点击(此处)折叠或打开
root@10.30.5.2:sysbench# ./sysbench --num-threads=64 --max-requests=200000 --test=oltp --db-driver=mysql --mysql-user=root --mysql-host=10.30.22.xxx --mysql-password=xxx --oltp-test-mode=complex --mysql-db=tab --oltp-table-size=5000000 --oltp-num-tables=16 run
sysbench 0.4.12.10: multi-threaded system evaluation benchmark
Running the test with following options:
Number of threads: 64
Random number generator seed is 0 and will be ignored
Doing OLTP test.
Running mixed OLTP test
Using Special distribution (12 iterations, 1 pct of values are returned in 75 pct cases)
Using "BEGIN" for starting transactions
Using auto_inc on the id column
Maximum number of requests for OLTP test is limited to 200000
Using 16 test tables
Threads started!
Done.
OLTP test statistics:
queries performed:
read: 2800224
write: 1000080
other: 400032
total: 4200336
transactions: 200016 (2000.64 per sec.)
deadlocks: 0 (0.00 per sec.)
read/write requests: 3800304 (38012.16 per sec.)
other operations: 400032 (4001.28 per sec.)
General statistics:
total time: 99.9760s
total number of events: 200016
total time taken by event execution: 6394.8091
response time:
min: 11.00ms
avg: 31.97ms
max: 293.00ms
approx. 95 percentile: 52.10ms
Threads fairness:
events (avg/stddev): 3125.2500/50.55
execution time (avg/stddev): 99.9189/0.01
③ 测试清除
点击(此处)折叠或打开
root@10.30.5.2:sysbench# ./sysbench --num-threads=64 --max-requests=200000 --test=oltp --db-driver=mysql --mysql-user=root --mysql-host=10.30.22.xxx --mysql-password=xxx --oltp-test-mode=complex --mysql-db=tab --oltp-table-size=5000000 --oltp-num-tables=16 cleanup
sysbench 0.4.12.10: multi-threaded system evaluation benchmark
Dropping table 'sbtest'...
Dropping table 'sbtest1'...
Dropping table 'sbtest2'...
Dropping table 'sbtest3'...
Dropping table 'sbtest4'...
Dropping table 'sbtest5'...
Dropping table 'sbtest6'...
Dropping table 'sbtest7'...
Dropping table 'sbtest8'...
Dropping table 'sbtest9'...
Dropping table 'sbtest10'...
Dropping table 'sbtest11'...
Dropping table 'sbtest12'...
Dropping table 'sbtest13'...
Dropping table 'sbtest14'...
Dropping table 'sbtest15'...
Done.
总结：
1> PREPARE阶段
在 PREPARE 阶段我们就需要想好，此时mysql 的配置，如 innodb_flush_log_at_trx_commit 、 sync_binlog 以及BP 的大小等。
然后结合 BP 的大小我们需要创建表的记录数，表的个数，并发线程等，综合考虑
① 若数据量 < BP 所有数据都会缓存到内存，此时增加 并发线程数 来测整个此时的CPU核数是否能抗住测试压力
② 若数据量 >> BP 则主要测试整个系统的稳定性，我们可以结合监控看缓存命中率( orzdba )，以及对应的 磁盘IO( iostat / orzdba ) 等，来获取整个数据库系统的薄弱点
2> RUN 阶段
在 RUN 阶段的同时 ，我们可以通过 orzdba/iostat 等工具查看当前的数据库状态
① 上面的测试结果我们可以看到，
transactions: 200016 (2000.64 per sec.) TPS 大概为 2000
read/write requests: 3800304 (38012.16 per sec.) QPS 达到 38000
approx. 95 percentile: 52.10ms 95%的请求相应时间在52.10ms左右
可以说性能是相当不错了(这里我测试的是腾讯云 CDB , 配置为 1000MB 的BP )
② 通过orzdba 结合running过程查看数据库状态
点击(此处)折叠或打开
root@10.30.5.2:orzdba_home# ./orzdba -mysql -innodb -rt
.=================================================.
| Welcome to use the orzdba tool ! |
| Yep...Chinese English~ |
'=============== Date : 2017-04-18 ==============='
HOST: 10.30.22.2 IP: 10.30.5.2
DB : performance_schema|tab
Var : binlog_format[MIXED] max_binlog_cache_size[17179869184G] max_binlog_size[1G]
max_connect_errors[999999999] max_connections[800] max_user_connections[0]
open_files_limit[102400] sync_binlog[0] table_definition_cache[768]
table_open_cache[512] thread_cache_size[512]
innodb_adaptive_flushing[ON] innodb_adaptive_hash_index[ON] innodb_buffer_pool_size[893M]
innodb_file_per_table[ON] innodb_flush_log_at_trx_commit[2] innodb_flush_method[O_DIRECT]
innodb_io_capacity[20000] innodb_lock_wait_timeout[7200] innodb_log_buffer_size[64M]
innodb_log_file_size[500M] innodb_log_files_in_group[2] innodb_max_dirty_pages_pct[75]
innodb_open_files[1024] innodb_read_io_threads[4] innodb_thread_concurrency[0]
innodb_write_io_threads[4]
-------- -QPS- -TPS- -Hit%- ---innodb bp pages status-- -----innodb data status---- --innodb log-- his --log(byte)-- read ---query--- ------threads------ -----bytes---- --------tcprstat(us)--------
time | ins upd del sel iud| lor hit| data free dirty flush| reads writes read written|fsyncs written| list uflush uckpt view inside que| run con cre cac| recv send| count avg 95-avg 99-avg|
17:24:53| 0 0 0 0 0| 0 100.00| 0 0 0 0| 0 0 0 0| 0 0| 0 0 0 0 0 0| 0 0 0 0| 0 0| 0 0 0 0|
17:24:54| 2153 6454 2153 30115 10760| 478891 97.72| 55869 0 19432 2372| 11355 6686 177.4m 79.2m| 2 5.1m| 137 1.7m 180.6m 57 0 0| 20 68 0 1| 1.1m 10.7m| 23711 267 183 236|
17:24:55| 1960 5891 1962 27470 9813| 437599 97.71| 55872 0 19793 2132| 10416 6063 162.8m 71.4m| 1 4.8m| 142 2.4m 183.5m 62 0 0| 14 68 0 1| 1005k 9.7m| 23004 356 215 283|
17:24:56| 2027 6091 2033 28422 10151| 451846 97.74| 55870 0 20024 2249| 10609 6320 165.8m 75.2m| 3 4.9m| 133 927k 186.5m 59 0 0| 8 68 0 1| 1.0m 10.2m| 22684 299 186 244|
17:24:57| 2291 6865 2286 32067 11442| 511514 97.69| 55870 0 20248 2611| 12314 7194 192.4m 87.0m| 2 5.4m| 128 19k 189.6m 54 0 0| 4 68 0 1| 1.1m 11.5m| 25197 267 188 234|
17:24:58| 2210 6632 2207 30947 11049| 493747 97.77| 55865 0 20361 2371| 11478 6810 179.3m 79.5m| 2 5.4m| 130 267k 192.9m 64 0 0| 48 68 0 1| 1.1m 11.3m| 24586 270 182 232|
17:24:59| 2225 6680 2226 31102 11131| 496716 97.70| 55866 0 20305 2602| 11891 7059 185.8m 86.6m| 1 5.3m| 149 473k 196.0m 53 0 0| 11 68 0 1| 1.1m 11.3m| 20655 371 219 304|
17:25:00| 2126 6377 2130 29819 10633| 472984 97.70| 55868 0 20195 2489| 11332 6749 177.1m 82.8m| 2 5.0m| 125 370k 199.0m 62 0 0| 13 68 0 1| 1.1m 10.8m| 8707 958 664 856|
17:25:01| 2169 6507 2165 30307 10841| 484346 97.71| 55766 99 20214 2485| 11550 6849 180.5m 82.7m| 1 5.1m| 133 808k 202.0m 57 0 0| 15 68 0 1| 1.1m 11.2m| 8578 996 636 844|
可以发现 在 32个 thread并发进行complex操作的时候，每秒的insert量 update量 delete量 select量可以看得非常清楚，还有innodb_log 的fsync量，以及数据库的response time。
感谢各位的阅读！关于“MySQL如何使用sysbench做OLTP基准测试”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，让大家可以学到更多知识，如果觉得文章不错，可以把它分享出去让更多的人看到吧！
重庆分公司
重庆分公司
