RabbitMQ发送端接收端生产者消费者的示例分析

这篇文章给大家分享的是有关RabbitMQ发送端接收端生产者消费者的示例分析的内容。小编觉得挺实用的，因此分享给大家做个参考，一起跟随小编过来看看吧。

创新互联专注于企业营销型网站、网站重做改版、晋中网站定制设计、自适应品牌网站建设、H5网站设计、成都商城网站开发、集团公司官网建设、成都外贸网站制作、高端网站制作、响应式网页设计等建站业务，价格优惠性价比高，为晋中等各大城市提供网站开发制作服务。

rabbit_conn_send_producer.py
importpika

connection = pika.BlockingConnection(pika.ConnectionParameters(
    'localhost'))#rabbit默认端口5672 建立一个基本的 socket连接
channel = connection.channel()#声明一个管道 在管道里面发消息

# 声明queue
channel.queue_declare(queue='hello')

# n RabbitMQ a message can never be sent directly to the queue, it always needs to go through an exchange.
channel.basic_publish(exchange='',
                      routing_key='hello',#queue名字
                      body='Hello World!') #body 发送的消息
print(" [x] Sent 'Hello World!'")
connection.close()

rabbit_conn_recive_consumer.py
# _*_coding:utf-8_*_
__author__ = 'Alex Li'
importpika

connection = pika.BlockingConnection(pika.ConnectionParameters(
    'localhost')) #rabbit默认端口5672 建立一个基本的 socket连接
channel = connection.channel()#声明一个管道 在管道里面收消息

# You may ask why we declare the queue again ‒ we have already declared it in our previous code.
# We could avoid that if we were sure that the queue already exists. For example if send.py program
# was run before. But we're not yet sure which program to run first. In such cases it's a good
# practice to repeat declaring the queue in both programs.
#channel.queue_declare(queue='hello')#声明queue


defcallback(ch, method, properties, body):#处理消息
    print("---->",ch,method,properties)#ch 管道内存对象地址 method:发给queue的信息
    print(" [x] Received %r"% body)


channel.basic_consume(#消费消息
           callback,#如果收到消息，就调用CALLBACK函数来处理消息
           queue='hello',#从哪个队列里收消息
           no_ack=True) #不需要确认消息是否接收

print(' [*] Waiting for messages. To exit press CTRL+C')
channel.start_consuming()#启动 开始收消息 一直收，没有就卡主

rabbit_conn_recive_consumer_no_ack.py
# _*_coding:utf-8_*_
__author__ = 'Alex Li'
importpika,time

connection = pika.BlockingConnection(pika.ConnectionParameters(
    'localhost')) #rabbit默认端口5672 建立一个基本的 socket连接
channel = connection.channel()#声明一个管道 在管道里面收消息

# You may ask why we declare the queue again ‒ we have already declared it in our previous code.
# We could avoid that if we were sure that the queue already exists. For example if send.py program
# was run before. But we're not yet sure which program to run first. In such cases it's a good
# practice to repeat declaring the queue in both programs.
#channel.queue_declare(queue='hello')#声明queue


defcallback(ch, method, properties, body):#回调函数
    print("---->",ch,method,properties)#ch 管道内存对象地址 method:发给queue的信息
    time.sleep(5)#模拟消息处理时间
    print(" [x] Received %r"% body)


channel.basic_consume(#消费消息
              callback,#如果收到消息，就调用CALLBACK函数来处理消息
           queue='hello',#从哪个队列里收消息
              #no_ack=True)#no acknowledgement 不确认 开启的话表示不确认消息是否接收 接没接收都不会给服务器端发消息 如果客户端没收到消息就忽略了
              #关闭的话就要服务器就要确认消息是否接收，没有确认到接收消息就会一直保留消息,会自动转到另一个客户端，socket一断，rabbitMQ就将消息转给另一个客户端
              #发送端生产者发送一条消息，被消费者接受者收到了，消费者接收端处理完之后自动给生产者发送端发一个确认，说消息处理完了，然后生产者发送端才会把消息从队列里删除，只要没收到确认就不会删除，如果生产者发送端没收到确认，就会把消息转给另一个消费者接收端
          )

print(' [*] Waiting for messages. To exit press CTRL+C')
channel.start_consuming()#启动 开始收消息 一直收，没有就卡主

感谢各位的阅读！关于“RabbitMQ发送端接收端生产者消费者的示例分析”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，让大家可以学到更多知识，如果觉得文章不错，可以把它分享出去让更多的人看到吧！