本篇文章为大家展示了VMware虚拟机重启网络报错" Error: No suitable device found"该怎么办，内容简明扼要并且容易理解，绝对能使你眼前一亮，通过这篇文章的详细介绍希望你能有所收获。
创新互联公司于2013年创立，是专业互联网技术服务公司，拥有项目成都做网站、网站建设网站策划，项目实施与项目整合能力。我们以让每一个梦想脱颖而出为使命，1280元拉孜做网站,已为上家服务,为拉孜各地企业和个人服务,联系电话:028-86922220
在VMware虚拟机中克隆CentOS，重启网络时报错
[root@localhost ~]# service network restart
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: Error: No suitable device found: no device found for connection 'System eth0'.
[FAILED]
查看网络设置，发现网卡的MAC地址配置有问题
[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="dhcp"
HWADDR="00:0c:29:f5:68:ae"
IPV6INIT="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
UUID="08734f61-956d-4d50-b8ca-ef9fd9242f60"
[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth2
DEVICE=eth2
BOOTPROT=static
HWADDR="00:0c:29:f5:68:b8"
IPADDR=192.168.174.30
GATEWAY=192.168.174.1
NETMASK=255.255.255.0
ONBOOT=yes
[root@localhost ~]# cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x8086:0x100f (e1000) (custom name provided by external tool)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:f5:68:ae", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:f5:68:b8", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"
# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:05:7a:9d", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"
# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:05:7a:a7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4"
更改网卡设置
[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="dhcp"
HWADDR="00:0c:29:05:7a:9d"
IPV6INIT="yes"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
UUID="08734f61-956d-4d50-b8ca-ef9fd9242f60"
[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth2
DEVICE=eth2
BOOTPROT=static
HWADDR="00:0c:29:05:7a:a7"
IPADDR=192.168.174.30
GATEWAY=192.168.174.1
NETMASK=255.255.255.0
ONBOOT=yes
删除下面配置文件中的网卡信息
[root@localhost ~]# cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
重启虚拟机后，恢复正常
[root@localhost ~]# reboot
[root@localhost ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:05:7A:9D
inet addr:192.168.174.133 Bcast:192.168.174.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe05:7a9d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26 errors:0 dropped:0 overruns:0 frame:0
TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3445 (3.3 KiB) TX bytes:3147 (3.0 KiB)
eth2 Link encap:Ethernet HWaddr 00:0C:29:05:7A:A7
inet addr:192.168.174.30 Bcast:192.168.174.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe05:7aa7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1696 (1.6 KiB) TX bytes:1045 (1.0 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:720 (720.0 b) TX bytes:720 (720.0 b)
上述内容就是VMware虚拟机重启网络报错" Error: No suitable device found"该怎么办，你们学到知识或技能了吗？如果还想学到更多技能或者丰富自己的知识储备，欢迎关注创新互联行业资讯频道。
重庆分公司
重庆分公司
